Table 31. System Setup options—Display menu
Display
Display Brightness
Brightness on battery power Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Touchscreen Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
NOTE: Only available on computers with touch screen displays.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Full Screen Logo Enables or disables the computer to display full screen logo, if the image matches
screen resolution.
By default, the Full Screen Logo option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 32. System Setup options—Connection menu
Connection
Wireless Device Enable
WWAN/GPS Enables or disables the internal WWAN device.
By default, the WWAN/GPS option is enabled.
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Wireless Radio Control
Control WLAN Radio Enables to sense the connection of the computer to a wired network and then
disables the selected WLAN radio. Upon disconnection from the wired network,
the selected wireless radios are reenabled.
By default, the Control WLAN Radio option is disabled.
BIOS Setup 95
To Next Page
Loading...
