EasyManua.ls Logo

Dell Latitude 9520 2-in-1 - Removing and installing components; Recommended tools; Screw list

Dell Latitude 9520 2-in-1
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Removing and installing components
Topics:
Recommended tools
Screw list
Major components of your system
SIM card tray
MicroSD card
Base cover
WWAN card
Solid-state drive
Speakers
System board
I/O daughter board power cable
I/O daughter board
Power button
Power button with finger print reader (optional)
Battery
Smart card reader
System board
Display assembly
Keyboard assembly
Palmrest assembly
Recommended tools
The procedures in this document may require the following tools:
Phillips screwdriver #1
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some systems have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Latitude 9520 screw list
Component Screw type Quantity Image
Base cover Captive screws 9
2
Removing and installing components 11

Table of Contents

Related product manuals