Table 13. Update Recovery (continued)
Options Description
● Off
● 1
● 2 (selected by default)
● 3
System Management
This section provides System Management settings.
Table 14. System Management
Options Description
Service Tag
Service Tag
This field provides the unique Service Tag of the computer.
Asset Tag
Asset Tag
This field provides the asset tag which is a unique and up
to 64-character identification that can be set by the IT
administrator.
AC Behaviour
Wake on AC
This field contains a toggle switch which allows the user to
enable or disable the feature where the system boots when
charger is detected (OFF by default).
Wake on LAN
Wake on LAN
This field allows the user to select if and how the system
should boot when connected to LAN. The options here are as
follows:
● Disabled - The system will not boot with any special LAN
signals (selected by default).
● LAN only - Allows the system to be powered on by a
special LAN signal from a network computer.
● LAN with PXE Boot - Allows the system to wake-up from
S4 or S5 state and boot to PXE.
Auto On Time
Auto On Time
This field allows the user to set defined days/time when the
sytem can automatically power on. The options here are as
follows:
● Disabled (selected by default)
● Everyday
● Weekdays
● Select Days
Intel AMT Capability
Enable Intel AMT capability
This section allows the user to control AMT options on the
system:
● Disabled
● Enabled
● Restrict MEBx Access - Selected by default
System setup 77
To Next Page
Loading...
