About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps
1. Align and place the speakers in the slot on the system.
2. Replace the four (M1.6x1.8) screws that secure the speakers to the system.
3. Route the speaker cables through the routing guide and connect the speaker cable to the connector.
4. Adhere the adhesive tape and reconnect the battery cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the SIM card tray.
3. Install the microSD card.
4. Follow the procedure in After working inside your computer.
Removing and installing components
27
To Next Page
Loading...
