Steps
After performing the preceding steps, you are left with the palmrest assembly.
Next steps
1. Install the keyboard.
2. Install the power button.
3. Install the I/O daughter board .
4. Install the system board.
5. Install the display assembly.
6. Install the battery.
7. Install the speakers.
8. Install the WWAN card.
9. Install the solid-state drive.
10. Install the base cover.
11. Install the SIM card tray.
12. Install the microSD card.
13. Follow the procedure in After working inside your computer.
62 Removing and installing components
To Next Page
Loading...
