Table 21. Disgnostic LED states (continued)
Amber LED state White LED state System state Notes
2 2 System board failure (included
BIOS corruption or ROM
error)
Flash latest BIOS version
If problem persists, replace
the system board
2 3 No memory/ RAM detected
Confirm that the memory
module is installed properly
If problem persists, replace
the system board
2 4 Memory/ RAM failure
Reset the memory module
If problem persists, replace
the system board
2 5 Invalid memory installed
Reset the memory module
If problem persists, replace
the system board
2 6 System board/ Chipset error
Flash latest BIOS version
If problem persists, replace
the system board
2 7 LCD failure
Flash latest BIOS version
If problem persists, replace
the system board
2 8 LCD Power rail failure
Replace the system board
3 1 CMOS battery failure
Reset the CMOS battery
connection
If problem persists, replace
the system board
3 2 PCI or Video card/ chip failure
Replace the system board
3 3 BIOS Recovery Image not
found
Flash latest BIOS version
If problem persists, replace
the system board
3 4 BIOS Recovery Image found
but invalid
Flash latest BIOS version
If problem persists, replace
the system board
3 5 Power rail failure
EC ran into power sequencing
failure
If problem persists, replace
the system board
3 6 SBIOS Flash Corruption
Flash corruption detected by
SBIOS
If problem persists, replace
the system board
3 7 ME error
Timeout waiting on ME to
reply to HECI message
88 Troubleshooting
To Next Page
Loading...
