Dell Latitude E5400 - Processor

Back to Contents Page
Processor
Dell™Latitude™E5400DiscreteServiceManual
Removing the Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the heat sink from the computer.
5. Using a plastic scribe, rotate the processor cam lock counterclockwise.
6. Lifting straight up, remove the processor from the computer.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.