Dell Latitude E5400 - Display Bezel

Back to Contents Page
Display Bezel
Dell™Latitude™E5400DiscreteServiceManual
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the hinge cover from the computer.
5. Remove the keyboard from the computer.
6. Remove the display assembly from the computer.
7. Remove the palm rest from the computer.
8. Remove the system board from the computer.
9. Gently pry the display bezel from the display assembly by tucking your fingers under one edge of the bezel and working your way around the entire
bezel until it is completely free.
10. Remove the display bezel from the computer.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.