Dell Latitude E5430 - Installing the Thermal Module; Removing the Processor; Installing the Processor

Installing the Thermal Module
1. Place the thermal module in its compartment.
2. Tighten the screws that secures the thermal module to the computer.
3. Install:
a) right base panel
b) access panel
c) battery
d) SD memory card
4. Follow the procedures in After Working Inside Your Computer.
Removing the Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) right base panel
e) thermal module
3. Rotate the processor cam lock in a counter clockwise direction to the unlock position. Lift up the
processor and remove it from the computer.
Installing the Processor
1. Place the processor in its socket on the computer.
2. Rotate the processor cam lock in a clockwise direction to secure the processor.
3. Install:
a) thermal module
b) access panel
c) right base panel
d) battery
e) SD memory card
4. Follow the procedures in After Working Inside Your Computer.
30