Dell Latitude E5430 - Installing the Right Support Frame

5. Lift the right support frame away from the computer.
Installing the Right Support Frame
1. Place the right support frame on the computer.
2. Tighten the screws to secure the right support frame to the computer.
3. Connect the flat flex cable located at the base of the right support frame.
4. Install:
a) display assembly
b) palmrest
c) thermal module
d) right base panel
e) WLAN card
f) hard drive
g) optical drive
h) keyboard
i) keyboard trim
j) access panel
k) battery
l) ExpressCard
m) SD memory card
5. Follow the procedures in After Working Inside Your Computer.
40