Dell Latitude E5430 - Installing the Input;Output (I;O) Board

4. Lift the Input/Output (IO) board out of the computer.
Installing the Input/Output (I/O) Board
1. Place the Input/Output (I/O) board in the computer.
2. Tighten the screw to secure the Input/Output (I/O) board to the computer.
3. Install:
a) system board
b) left support frame
c) right support frame
d) display assembly
e) ExpressCard reader cage
f) palmrest
g) thermal module
h) right base panel
i) WLAN card
j) hard drive
k) optical drive
l) keyboard
m) keyboard trim
n) access panel
o) battery
p) ExpressCard
q) SD memory card
4. Follow the procedures in After Working Inside Your Computer.
49