Dell Latitude E5510 - Heat Sink; Removing the Heat Sink

Back to Contents Page
Heat Sink
Dell™Latitude™E5510DiscreteServiceManual
Removing the Heat Sink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the fan from the computer.
5. Loosen the screws securing the heat sink to the system board.
6. Lift up the heat sink at an angle and remove it from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.