Dell Latitude E5510 - LED Board; Removing the LED Board

Back to Contents Page
LED Board
Dell™Latitude™E5510DiscreteServiceManual
Removing the LED Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the LED cover from the computer.
4. Remove the keyboard from the computer.
5. Release the latch securing the LED Board cable.
6. Disconnect the LED Board cable.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.