5. Install:
a) display bezel
b) battery
6. Follow the procedures in After Working Inside Your Computer.
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) display bezel
3. Perform the following steps:
a) Remove the screw that secures the camera and microphone module.
b) Disconnect the camera cable.
c) Lift and remove the camera and microphone module.
Installing the Camera
1. Place the camera and microphone module on its place.
2. Connect the camera cable.
3. Tighten the screw to secure the camera and microphone module.
4. Install:
a) display bezel
b) battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard Trim
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
14
To Next Page
Loading...
