Dell Latitude E5540 - Installing the Keyboard Trim; Removing the Keyboard

3. Perform the following steps:
a) Remove the screw that secures the keyboard trim at the back of the computer.
b) Pry up the keyboard trim on its sides and the top edge.
c) Lift upwards and remove the keyboard trim from the computer.
Installing the Keyboard Trim
1. Align the keyboard trim to its place.
2. Press along the sides of the keyboard trim until it snaps in place.
3. Tighten the screw at the back of the computer to secure the keyboard trim.
4. Install the battery.
5. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) keyboard trim
15