16 Expansion Modules for Dell Networking Switches
4.4 Dell Networking 7000 Series (7024, 7024P, 7024F, 7048, 7048P,
7048R, and 7048R-RA)
There are seven different switch models in the Dell Networking 7000 series, each with two bays for expansion
modules. Depending on the model, the
rear view
of the switch is one of the three shown in Figure 10. The yellow
outlines show the two bays.
Figure 10 Dell Networking 7000 Series Switch (1G Ethernet) and Available Modules
Red lines on these Dell Networking modules indicate that they are hot-swappable modules. The CX4 Stacking
Module for the 7000 series is not capable of changing roles (to Ethernet) as is true for CX4 modules for the
62xx/M62xx. These stacking modules are only used for stacking.
To Next Page
Loading...
