3. Perform the following steps as shown in the illustration:
a. Using a scribe, pry the edges of the computer [1].
b. Remove the back cover from the computer [2].
Installing the Back Cover
1. Place the back cover on the computer.
2. Press at the corners of the back cover to secure it to the computer.
3. Install:
a. stand
b. stand cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand cover
b. stand
c. back cover
12
To Next Page
Loading...
