Installing coin cell battery
1 Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.
2 Press the battery into the connector until it locks into place.
3 Install the cover.
4 Follow the procedure in After working inside your computer.
Storage
Removing 2.5–inch drive assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the cover.
3 To remove the drive assembly:
a Press the blue tabs on both sides of the drive assembly [1].
b Push the drive assembly to release it from the computer [2].
c Remove the drive assembly from the computer [3].
10
Removing and installing components
To Next Page
Loading...
