Installing speaker
1 Align the slots on the speaker with the slots on the system fan.
2 Tighten the M2.5X4 screws to secure the speaker to the system fan.
3 Route the speaker cable through the retention hooks on the system fan.
4 Install the:
a system fan
b cover
5 Follow the procedure in After working inside your computer.
Memory module
Removing memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b system fan
3 To remove the memory module:
a Pull the securing clips from the memory module until the memory module pops up [1].
Removing and installing components
15
To Next Page
Loading...
