Dell OptiPlex 5050 Micro - Installing 2.5-Inch Drive Assembly; M.2 Pcie SSD; Removing the M.2 Pcie SSD

Installing 2.5–inch drive assembly
1 Insert the drive assembly into the slot on the computer.
2 Slide the drive assembly toward the connector until it clicks into place.
3 Install the cover.
4 Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing the M.2 PCIe SSD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b 2.5–inch drive assembly
3 To remove the M.2 PCIe SSD:
a Pull the blue tab to release the M.2 PCIe SSD [1].
b Disconnect the M.2 PCIe SSD from the connector [2].
12
Removing and installing components