b Remove the memory module from the socket on the system board [2].
Installing memory module
1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module socket and press it until it clicks into place.
3 Install the:
a system fan
b cover
4 Follow the procedure in After working inside your computer.
Heat sink
Removing heat sink
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b 2.5–inch drive assembly
c system fan
3 To remove the heat sink:
16
Removing and installing components
To Next Page
Loading...
