b Slide and lift the cover to remove from the computer.
NOTE: You may need a plastic scribe to release the cover from the edges.
Installing cover
1 Place the cover on the computer.
2 Slide the cover toward the back of the computer to install it.
3 Tighten the thumbscrew to secure the cover to the computer.
4 Follow the procedure in After working inside your computer.
Coin cell battery
Removing coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the cover.
3 To remove the coin cell battery:
a Press the release latch until the coin cell battery pops out [1].
b Remove the coin cell battery from the system board [2].
Removing and installing components
9
To Next Page
Loading...
