Memory module
Removing memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
3 To remove the memory module:
a Push the memory module retention tabs on both sides of the memory module.
b Lift the memory module from the memory module connector on the system board.
Installing the memory module
1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module socket.
3 Press the memory module until the memory module retention tabs click into place.
4 Install the:
a optical drive
b 2.5–inch drive assembly
c bezel
d cover
5 Follow the procedure in After working inside your computer.
SD card reader
Removing the SD card reader
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
e M.2 PCIe SSD
3 To remove the SD card reader:
24
Removing and installing components
To Next Page
Loading...
