Dell OptiPlex 5050 Small Form Factor - Installing the optical drive; M.2 PCIe SSD; Removing the M.2 PCIe SSD

Installing the optical drive
1 Slide the optical drive into the optical drive module.
2 Align the tabs on the optical module with the slots on the computer.
3 Lower the optical drive module into the computer and lock the latch.
4 Connect the data and power cables to the optical drive.
5 Install the:
a 2.5–inch drive assembly
b bezel
c cover
6 Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing the M.2 PCIe SSD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
3 To remove the M.2 PCIe SSD:
a Pull the blue tab to release the M.2 PCIe SSD .
b Disconnect the M.2 PCIe SSD from the SSD connector.
20
Removing and installing components