10. SATA 0 connector
11. SATA 1 connector
12. ATX system power connector
13. SATA 3 connector
14. Internal speaker cable connector
15. Coin-cell battery
16. PCIe x16 (Slot2) and PCIe x4 (Slot1)
17. PS/2 KB/Mouse Connector
18. Processor socket
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5/3.5-inch hard-drive caddy.
5. Remove the graphics card.
6. Remove the solid-state drive.
7. Remove the WLAN card.
8. Remove the fan assembly.
9. Remove the memory modules.
10. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
56
Removing and installing components
To Next Page
Loading...
