3. Close the front panel door.
4. Install the:
a. Front bezel
b. Side cover
5. Follow the procedure in After working inside your computer.
SD card reader
Removing SD card reader
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To remove the SD card reader:
a. Disconnect the SD card reader cable from the connector on the system board [1].
b. Remove the screw that secures the SD card reader to the front panel door [2].
c. Lift the SD card reader out of the system [3].
30
Disassembly and reassembly
To Next Page
Loading...
