4. Close the front panel door.
5. Install the:
a. Front bezel
b. Side cover
6. Follow the procedure in After working inside your computer.
Power button
Removing power button
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
3. Open the front panel door.
4. To release the power button:
a. Disconnect the power button cable from the system board [1].
b. Unroute the power button cable through the retention clip [2].
c. Press the release tabs using a plastic scribe and slide the power button out from the front of the system [3].
d. Close the front panel door [5].
42
Disassembly and reassembly
To Next Page
Loading...
