Dell OptiPlex 7060 Tower - System Fan Replacement

4. Install the heatsink.
5. Install the heatsink fan.
6. Close the front panel door.
7. Install the:
a. Front bezel
b. Side cover
8. Follow the procedure in After working inside your computer.
System fan
Removing system fan
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
c. Intrusion switch
3. To remove the system fan:
a. Disconnect the system fan cable from the connector on the system board [1].
b. Stretch the grommets to remove the grommets securing the fan to the computer[2].
c. Slide the system fan out of the computer [3].
Disassembly and reassembly
55