4. Lift the cover and remove it from the computer using the notches near the input/output (I/O) panel.
Installing the Back Cover
1. Place the cover on the back of the computer using the notches near the input/output (I/O) panel.
2. Tighten the screws to secure the back cover to the computer.
3. Install the VESA stand.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) VESA stand
b) back cover
12
To Next Page
Loading...
