Installing the Camera
1. Tighten the screws to secure the camera to the chassis.
2. Connect the camera cable and fix the latch.
3. Install:
a) display panel
b) system board
c) power-supply fan
d) heat-sink assembly
e) power supply unit
f) processor fan
g) converter board
h) power and on-screen display (OSD) buttons board
i) intrusion switch
j) hard drive
k) optical drive
l) WLAN card
m) input/output (I/O) board shield
n) system-board shield
o) VESA mount bracket
p) back cover
q) VESA stand
4. Follow the procedures in
After Working Inside Your Computer
.
41
To Next Page
Loading...
