Installing the Power and On-Screen Display (OSD) Buttons Board
1. Align and place the power and on-screen display (OSD) buttons board on the computer.
2. Connect the cable to the power and on-screen display (OSD) buttons board.
3. Install:
a) back cover
b) VESA stand
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
3. Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from
the computer.
15
To Next Page
Loading...
