Dell OptiPlex XE2 - Page 25

DELL™ OPTIPLEX™ XE2 TECHNICAL GUIDEBOOK
25
COMMUNICATIONS – PO WERED SERIAL PORT PCIE ADD -IN CARD
NOTE : MT su p p o r ts full h e i ght ( FH) card s and SF F s uppo rt s lo w p r ole (L P) c ard s.
COMMUNICATIONS – PO WERED USB PORT PCIE A DD-IN CARD
2PORT 12V/1PORT 24V POWERED USB PORT PCIE ADD-IN CARD
MT SFF
Connector Type 1-port 24VDC & 2-port 12VDC Powered USB ports
Data Rates supported
High-Speed (HS), Full-Speed(FS) and Low-Speed(LS)
Data Transfer rate of 1.5, 12, and 480Mbps
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express Spec1.1, Single-Lane (x1)
Driver Support
Microsoft Client XP/Vista/7/8 (32bit/64bit)
Microsoft Server 2000 / 2003 / 2008 / 2008R2 / 2012
(32bit/64bit)
Microsoft Embedded POS Ready / Embedded System
Linux 2.4.x / 2.6.x /3.x
Full height Powered USB Port Optional
Half height Powered USB Port Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 70°C (-4°F to 158°F)
4 PORT POWERED SERIAL PORT PCIE ADD-IN CARD
MT
Connector Type RS-232
Data Rates supported 50bps ~115.2Kbps
Controller Details
Controller SUNIX SUN2410
Controller bus architecture (example PCIe 1.0a x1) PCI Express Spec2.0, Single-Lane (x1)
Driver Support
Microsoft Client XP/Vista/7/8 (32bit/64bit)
Microsoft Server 2000 / 2003 / 2008 / 2008R2 / 2012
(32bit/64bit)
Microsoft Embedded POS Ready / Embedded System
Linux 2.4.x / 2.6.x /3.x
DOS
Full height serial add-in card
Optional
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 70°C (-4°F to 158°F)