Dell OptiPlex XE2 - Removing and Installing Components; Recommended Tools; Removing the Cover; Installing the Cover

DELL™ OPTIPLEX™ XE2 TECHNICAL GUIDEBOOK
9
MEMORY
NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire
memory range is available to 64-bit operating systems.
1
The total amount of available memory will be less than 4GB. The amount less depends on the actual system configuration. To fully utilize 4GB or
more of memory requires a 64-bit enabled processor and 64-bit operating system.
MT SFF
Type: DDR3 Synch DRAM Non-ECC Memory 1600 MHz
DIMM Slots 4 4
DIMM Capacities Up to 8GB Up to 8GB
Minimum Memory 2GB 2GB
Maximum System Memory 32GB
1
32GB
1
Memory congurations
32GB
1
DDR3, 1600MHz, (4 x 8GB) (Test Only) X X
16GB
1
DDR3, 1600MHz, (2 x 8GB) X X
8GB
1
DDR3, 1600MHz, (2 x 4GB) X X
4GB
1
DDR3, 1600MHz, (2 x 2GB) X X
4GB
1
DDR3, 1600MHz, (1 x 4GB) X X
2GB
1
DDR3, 1600MHz, (1 x 2GB) X X