Dell OptiPlex XE2 - Installing the Input;Output (I;O) Panel; Removing the System Board

DELL™ OPTIPLEX™ XE2 TECHNICAL GUIDEBOOK
29
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES
1
(CONT.)
3.5” 500GB SATA3 10K RPM HDD
MT SFF
Capacity (bytes) 500,107,862,016
Dimensions inches (W x D x H) 5.87 x 4 x 1
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
Internal buer size 16 MB
Average Seek Time 9ms
Rotational Speed 10000 rpm
Logical Blocks 976,773,168
Power Source
Power Consumption (reference only) Idle 5.0W, Active 10.0W(running IOmeter utility)
Spin Up Current (reference only) 5V (1A) ,12V (2A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5
0
C to 60
0
C
Relative Humidity Range 10% to 90% non-condensing
Maximum Dew Point Temperature
Operating: 26°C
Non-Operating: 33° C
Altitude Range -1000 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40
0
C to 65
0
C
Relative Humidity Range 5% to 95% non-condensing
Maximum Wet Bulb Temperature 33
0
C
Altitude Range -1000 ft to 40000 ft