Table 34. System Setup options—Security menu(continued)
Security
Dynamic Shutter Device camera shutter will automatically open when user grants application
permission and closes when permission ends. Disable dynamic behavior by
pressing F9 camera mute (LED on).
By default, the Dynamic Shutter option is disabled.
Manual Shutter Control Manual Shutter Control
Disengage camera off by pressing F9 to open shutter (LED off).
Engage camera on by pressing F9 to close shutter (LED on).
By default, the Manual Shutter Control option is enabled.
Firmware Device Tamper Detection The field controls the Firmware Device Temper Detection feature.
By default, the Firmware Device Tamper Detection set to silent.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Clear Firmware Device Tamper
Detection
Select this option to clear the event and allow booting.
By default, the Clear Firmware Device Tamper Detection option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Intel Platform Trust Technology
PPI BYpass for Clear Commands
By default, the PPI BYpass for Clear Commands option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Intel Platform Trust Technology On
By default, the Intel Platform Trust Technology On option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Clear
By default, the Clear option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 35. System Setup options—Passwords menu
Passwords
Administrator Password The Administrator Password prevents unauthorized access to the BIOS Setup
options. Once the administrator password is set, the BIOS Setup options can only
be modified after providing the correct password.
The following rules and dependencies apply to the Administrator Password -
● The administrator password cannot be set if system and/or internal hard drive
passwords are previously set.
● The administrator password can be used in place of the system and/or
internal hard drive passwords.
● When set, the administrator password must be provided during a firmware
update.
●
Clearing the administrator password also clears the system password (if set).
Dell Technologies recommends using an administrator password to prevent
unauthorized changes to BIOS Setup options.
BIOS Setup 101
To Next Page
Loading...
