Dell P166G - Set up Your Latitude 9450 2-in-1; Initial Setup Steps

To Next Page

To Previous Page

Set up your Latitude 9450 2-in-1

About this task

NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Steps

1. Connect the power adapter and press the power button.

Figure 11. Connecting the power adapter

NOTE:

The battery may go into power-saving mode during shipment to conserve charge on the battery. Ensure that the

power adapter is connected to your computer when it is turned on for the first time.

2. Finish the operating system setup.

For Windows:

Follow the on-screen instructions to complete the setup. When setting up, Dell Technologies recommends that you:

● Connect to a network for Windows updates.

NOTE:

If connecting to a secured wireless network, enter the password for the wireless network access when

prompted.

● If connected to the Internet, sign in with or create a Microsoft account.

● On the Support and Protection screen, enter your contact details.

3. Locate and use Dell apps from the Windows Start menu—Recommended.

14 Set up your Latitude 9450 2-in-1

Other manuals for Dell P166G