Dell P2722HE - Page 50

50  │  Operating the monitor
Auto Select for
USB-C
Allows you to set Auto Select for USB-C to:
• Pr
ompt for Multiple Inputs: Always displays
the “Switch to USB-C Video Input” message
for you to choose whether to switch or not.
• Ye
s: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: N
ever automatically switches to USB-C video
input when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: T
he option is available only when Auto
Select is on.
Rename Inputs Allows you to specify a preset input name for the
se
lected input source. The preset options are PC,
PC 1, PC 2, La
ptop, Laptop 1, and Laptop 2. The
default setting is Off.
NOTE: Wh
en you perform a rename for the USB-C
input, the wattage value remains after the specified
option, e.g., PC 1
65W.
NOTE: It is no
t applicable for the input names shown
in the warning messages and Display Info.
Reset Input
Sour
ce
Resets your monitor input settings to the factory
settings.