Dell P2724DEB - Page 107

Troubleshooting | 107
Common
Symptoms
What you
experience
Possible solutions
Intermittent
Problems
Monitor
malfunctions on
& off
• Ensure that the video cable connecting
the monitor to the computer is connected
properly and is secure.
• Reset the monitor to factory settings.
• Perform monitor self-test feature check to
determine if the intermittent problem occurs
in self-test mode.
Missing Color Picture missing
color
• Perform monitor self-test.
• Ensure that the video cable connecting
the monitor to the computer is connected
properly and is secure.
• Check for bent or broken pins in the video
cable connector.
Wrong Color Picture color not
good
• Change the settings of the Preset Modes
in the Color menu OSD depending on the
application.
• Adjust R/G/B value under Custom Color in
Color menu OSD.
• Change the Input Color Format to PC RGB or
YPbPr in the Color menu OSD.
• Run the built-in diagnostics.
Image retention
from a static
image left on
the monitor for
a long period of
time
Faint shadow from
the static image
displayed appears
on the screen
• Set the screen to turn o after a few minutes
of screen idle time. These can be adjusted in
Windows Power Options or Mac Energy Saver
setting.
• Alternatively, use a dynamically changing
screensaver.
Mic/Webcam
does not work
• USB cable
not plug in or
not select the
correct USB
source
• Not set the
monitor Mic/
webcam as the
default device
• Plug in the USB Cable (Type-A to Type-B or
Type-C to Type-C), and if you connect both
USB-C port, please switch the USB source in
the OSD menu.
• Select the monitor Mic/webcam as the
default in the PC side.
• Touch the Mic button and make sure the Mic
mute LED is dark.