What to do for missing pixels on a Dell P2815Q?
If you observe missing pixels on your Dell Monitor, cycle the power off and on. A pixel that is permanently off is a natural defect that can occur in LCD technology.
How to fix brightness problems on a Dell Monitor?
If you're experiencing brightness problems with your Dell Monitor, try resetting the monitor to its factory settings. You can also perform Auto Adjust via the OSD, or manually adjust the brightness and contrast controls in the OSD.
Why doesn't the picture fill the entire screen on my Dell Monitor?
If the picture on your Dell Monitor does not fill the entire screen, it may be due to different video formats (aspect ratios) of DVDs. The monitor may display in full screen. You can also run the built-in diagnostics.
Why is the USB interface not working on my Dell P2815Q?
If the USB interface on your Dell Monitor isn't working, ensure that the monitor is turned on. Try reconnecting the upstream cable to your computer and the USB peripherals. Also, try switching the monitor off and on again, and rebooting your computer. Some USB devices may require more power, so connect them directly to the computer.
How to fix a Dell P2815Q when the screen image is too small?
If your Dell Monitor image is too small, reset the monitor to Factory Settings.
How to prevent image retention on my Dell Monitor?
To address image retention on your Dell Monitor, use the Power Management feature to turn off the monitor when not in use. Alternatively, use a dynamically changing screensaver.
Why is the MHL interface not working on my Dell P2815Q Monitor?
If the MHL interface on your Dell Monitor isn't working, reconnect the upstream cable and ensure your MHL cable and device are MHL certified. Check that your MHL device is turned on and not in standby mode. Verify the physical MHL cable connection corresponds to the input source selected on the OSD Menu (i.e., HDMI (MHL)). Allow 30 seconds after connecting the MHL cable, as some devices require longer recovery time.
How to correct geometric distortion on a Dell P2815Q?
If you notice geometric distortion on your Dell Monitor, reset the monitor to Factory Settings. Then, perform Auto Adjust via the OSD. Finally, adjust brightness & contrast controls via the OSD.
What to do if I cannot adjust my Dell P2815Q with the front panel buttons?
If you cannot adjust your Dell monitor with the buttons on the front panel, turn off the monitor, unplug the power cord, plug it back in, and then turn the monitor on.
How to fix horizontal or vertical lines on a Dell Monitor?
If you see horizontal or vertical lines on your Dell Monitor, reset the monitor to Factory Settings. Perform Auto Adjust via the OSD. Adjust the Phase and Pixel Clock controls via the OSD. Perform a monitor self-test feature check to determine if these lines are also present in self-test mode. Check for bent or broken pins in the video cable connector.
Using the quick settings dialog for monitor adjustments.
Technical details including resolution, refresh rates, and inputs.
How to connect video cables (DP, HDMI) to the computer.
Navigating and adjusting settings via the OSD menu.
Running the monitor's self-test feature.
Using the monitor's diagnostic tools for issue identification.
General guide to common monitor issues and solutions.
Troubleshooting issues unique to this monitor model.
Using the quick settings dialog for monitor adjustments.
Technical details including resolution, refresh rates, and inputs.
How to connect video cables (DP, HDMI) to the computer.
Navigating and adjusting settings via the OSD menu.
Running the monitor's self-test feature.
Using the monitor's diagnostic tools for issue identification.
General guide to common monitor issues and solutions.
Troubleshooting issues unique to this monitor model.
To Next Page
General
