What to do if I cannot adjust my Dell P2815Q with the front panel buttons?
If you cannot adjust your Dell monitor with the buttons on the front panel, turn off the monitor, unplug the power cord, plug it back in, and then turn the monitor on.
What to do if my Dell P2815Q Monitor says 'No Input Signal'?
If your Dell Monitor displays 'No Input Signal' when you press the user controls, first, ensure the computer isn't in power-saving mode by moving the mouse or pressing a key. Verify that the signal cable is properly plugged in, and if necessary, replug it. If the issue persists, try resetting your computer or video player.
How to fix horizontal or vertical lines on a Dell Monitor?
If you see horizontal or vertical lines on your Dell Monitor, reset the monitor to Factory Settings. Perform Auto Adjust via the OSD. Adjust the Phase and Pixel Clock controls via the OSD. Perform a monitor self-test feature check to determine if these lines are also present in self-test mode. Check for bent or broken pins in the video cable connector.
How to resolve synchronization problems on a Dell Monitor?
If you are experiencing synchronization problems with your Dell Monitor, reset the monitor to Factory Settings. Perform Auto Adjust via the OSD. Adjust Phase and Pixel Clock controls via the OSD. Perform a monitor self-test feature check to see if the scrambled screen appears in self-test mode. Check for bent or broken pins in the video cable connector. Restart the computer in safe mode.
Why is my Dell P2815Q Monitor video shaky or jittery?
If you're getting a shaky or jittery video on your Dell Monitor, perform Auto Adjust via the OSD. Adjust the Phase and Pixel Clock controls via the OSD. Reset the monitor to Factory Settings. Check for any environmental factors that might be causing interference. You might also want to relocate the monitor and test it in another room.
What to do if Dell Monitor has no video but power LED is on?
If your Dell Monitor has no video but the power LED is on, increase the brightness and contrast controls via the OSD. Perform a monitor self-test feature check. Check for bent or broken pins in the video cable connector. Ensure that the correct input source is selected via the Input Source Select menu. Finally, run the built-in diagnostics.
How to fix a Dell P2815Q Monitor with no video and the power LED off?
If you are experiencing 'No Video' and the power LED is off on your Dell Monitor, ensure that the video cable connecting the monitor and the computer is properly connected and secure. Verify that the power outlet is functioning correctly by testing it with other electrical equipment. Also, make sure that the power button is fully depressed.
How to fix a Dell P2815Q when the screen image is too small?
If your Dell Monitor image is too small, reset the monitor to Factory Settings.
Why is the USB interface not working on my Dell P2815Q?
If the USB interface on your Dell Monitor isn't working, ensure that the monitor is turned on. Try reconnecting the upstream cable to your computer and the USB peripherals. Also, try switching the monitor off and on again, and rebooting your computer. Some USB devices may require more power, so connect them directly to the computer.
Why doesn't the picture fill the entire screen on my Dell Monitor?
If the picture on your Dell Monitor does not fill the entire screen, it may be due to different video formats (aspect ratios) of DVDs. The monitor may display in full screen. You can also run the built-in diagnostics.
Using the quick settings dialog for monitor adjustments.
Technical details including resolution, refresh rates, and inputs.
How to connect video cables (DP, HDMI) to the computer.
Navigating and adjusting settings via the OSD menu.
Running the monitor's self-test feature.
Using the monitor's diagnostic tools for issue identification.
General guide to common monitor issues and solutions.
Troubleshooting issues unique to this monitor model.
To Next Page
General
