S
SATA Solid State Drive (SSD)
Removing SATA SSD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
3 To remove the SATA SSD:
a Remove the M2 x 3 screw that secures the SSD [1].
b Slide and lift the SSD to disconnect it from the connector [2].
1 Insert the SATA SSD card into the connector.
2 Tighten the screw to secure the SATA SSD to the system board.
3 Install the:
a battery
b base cover
4 Follow the procedure in After working inside your computer.
Removing and installing components 15
To Previous Page
Loading...
