Need help?Do you have a question about the Dell P28S and is the answer not in the manual?
Primary steps to take before performing any disassembly or reassembly procedures for safety.
Information regarding products with standby power and the need to unplug them before opening.
Method for connecting grounding conductors to the same electrical potential using an ESD kit.
Explains ESD risks, damage types (catastrophic/intermittent) for electronic components.
Details the unmonitored Field Service kit, its components, and usage for ESD protection.
Steps to prevent ESD damage, including using wrist straps, static-safe areas, and proper component handling.
Guidelines for setting up a work area and safely packaging sensitive electronic components.
Essential steps and cautions to follow before commencing any internal computer work.
Lists the necessary tools required for component removal and installation procedures.
Provides a table detailing screw sizes for various computer components.
Step-by-step instructions for removing the SIM card or its tray from the computer.
Instructions for replacing the SIM card on systems equipped with a WWAN module.
Detailed steps for safely removing the computer's base cover.
Instructions for correctly installing the computer's base cover after service.
Procedure for disconnecting and removing the 3-cell battery from the computer.
Steps for inserting and securing the 3-cell battery into the computer.
Procedure for disconnecting and removing the 4-cell battery from the computer.
Steps for inserting and securing the 4-cell battery into the computer.
Instructions for removing a PCIe Solid State Drive (SSD) with its bracket.
Procedure for removing a PCIe SSD when it is not secured by a bracket.
Steps for inserting and securing the PCIe SSD and its bracket.
Procedure for removing a SATA Solid State Drive (SSD) from the computer.
Steps for inserting and securing a SATA SSD into the computer.
To Next Page
General
