Guiding Signals
Table 3. Guiding Signals
Projector Status Description Power Indicator
TEMP (Amber) LAMP (Amber)
Standby mode
Projector in Standby
mode. Ready to power
on.
White Flashing
OFF OFF
Warming up mode
Projector takes some
time to warm up and
power on.
White OFF OFF
Lamp on
Projector in Normal
mode, ready to display an
image.
NOTE: The OSD
menu is not
accessed.
White OFF OFF
Cooling mode Projector is cooling to
shutdown.
White OFF OFF
Projector overheated
Air vents might be
blocked or ambient
temperature may be
above 35 °C. The
projector automatically
shuts down. Ensure that
the air vents are not
blocked and that the
ambient temperature is
within operational range.
If the problem persists,
contact Dell.
OFF AMBER OFF
Lamp driver overheated
The lamp driver is
overheated. The air vents
may be blocked. The
projector automatically
shuts down. Turn the
display on again after the
projector cools down. If
the problem persists,
contact Dell.
AMBER AMBER OFF
Fan breakdown
One of the fans has
failed. The projector
automatically shuts down.
OFF AMBER Flashing OFF
20
34 Guiding Signals
To Next Page
Loading...
