Dell P5524Q - Electrical and Physical Characteristics

About your monitor | 15
Electrical specifications
Model P5524Q
Video input signals • Analog RGB, 0.7 Volts +/- 5%, positive polarity at
75 ohm input impedance
• HDMI, 600 mV for each differential line, 100 ohm
input impedance per differential pair
• DisplayPort, 600 mV for each differential line,
100 ohm input impedance per differential pair
AC input voltage /
frequency / current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz /
2.5 A (typical)
Inrush current 120 V: 30 A (Max.) at 0 °C (cold start)
240 V: 60 A (Max.) at 0 °C (cold start)
Power Consumption 0.3 W (O Mode)
1
0.5 W (Standby Mode)
1
84.0 W (On Mode)
1
1.0 W (Networked Standby Mode)
1
200 W (Max)
2
85 W (Pon)
3
Not Applicable (TEC)
3
1. As dened in EU 2019/2021 and EU 2019/2013.
2. Max brightness and contrast setting with maximum power loading on all USB ports.
3. Pon : Power consumption of On Mode as dened in Energy Star 8.0.
TEC: Total energy consumption in kWh as dened in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions about
electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed
or implied.