Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the solid-state drive.
5 Remove the memory modules.
6 Remove the wireless card.
7 Remove the computer base.
8 Follow the procedure from step 1 to step 14 in Removing the system board
66
To Next Page
Loading...
