Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
Place the power-adapter port into the slot on the computer base.
Post-requisites
1 Follow the procedure from step 3 to step 15 in Replacing the system board.
2 Replace the computer base.
3 Replace the wireless card.
4 Replace the memory modules.
5 Replace the solid-state drive.
6 Replace the rear cover.
7 Replace the battery.
8 Replace the base cover.
68
To Next Page
Loading...
