EasyManua.ls Logo

Dell P80F003 - Manageability; Virtualization Support

Dell P80F003
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
● Lock Mode Disable/Standard
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal
● Thorough—enabled by default
● Auto
Extended BIOS
POST Time
Allows you to create an extra preboot delay. The options are:
● 0 seconds—enabled by default.
● 5 seconds
● 10 seconds
Full Screen Log
● Enable Full Screen Logo—not enabled
Warnings and
errors
● Prompt on warnings and errors—enabled by default
● Continue on warnings
● Continue on warnings and errors
Manageability
Option
Description
Intel AMT
Capability
Allows you to provision AMT and MEBx Hotkey function is enabled, during the system boot.
● Disabled
● Enabled - by default
● Restrict MEBx Access
USB Provision When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
● Enable USB Provision - disabled by default
MEBX Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
● Enable MEBx hotkey—enabled by default
Virtualization support
Option
Description
Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted
Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
104 BIOS setup

Table of Contents