Replacing the palm-rest assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
Place the palm-rest assembly face down on a clean and flat surface.
Post-requisites
1. Replace the keyboard.
2. Replace the power button with optional fingerprint reader.
3. Replace the system board.
4. Replace the fans.
5. Replace the headset port.
6. Replace the display assembly.
7. Replace the speakers.
8. Replace the battery.
9. Replace the base cover.
33
Replacing the palm-rest assembly 59
To Next Page
Loading...
