Dell PowerConnect 2216 - 1000 Base-T Ports Link;Activity (SPD;LNK;ACT) LED (2324 Only); Duplex Mode;Collisions (FDX;HDX) LED; Figure 1-1. Powerconnect 2216

Introduction 7
1000Base-T Ports Link/Activity (SPD/LNK/ACT) LED (2324 only)
• Steady green — A 1000-Mbps link has been established, but no data is being transmitted or
received.
• Blinking green — A 1000-Mbps link has been established and data is being transmitted or
received.
• Off — No link established.
Duplex Mode/Collisions (FDX/HDX) LED
• Steady green — The port is operating in full-duplex mode.
• Blinking green — Collisions are occurring on the port.
• Off — The port is operating in half-duplex mode.
Figure 1-1. PowerConnect 2216
COMMENT
power LED
FDX/HDX LEDs
SPD/LNK/ACT LEDs
RJ-45 ports