Dell PowerEdge KVM 1081AD - Product ID group (dsProductID) 1.3.6.1.4.1.10418.3.3.1.1

166 LDAP Feature for the Remote Console Switch
2 Click Add/Remove Snap-in .
3 Select the Active Directory Users and Computers snap-in and click Add .
4 Click Close and click OK .
Adding Users and Privileges to Active Directory
with Dell Schema Extensions
The Dell-extended Active Directory Users and Computers snap-in allows you
to add Remote Console Switch users and privileges by creating SIP,
Association, and Privilege objects. To add each type of object, perform the
steps in each subsections.
Creating a SIP Object
1 In the MMC Console Root window, right-click a container.
2 Select New - Dell SIP Object . This opens the New Object window.
3 Type a name for the new object. This name must match the Remote
Console Switch Name that you will type in step 4 of “Configuring the
Remote Console Switch.”
4 Select SIP Device Object .
5 Click OK .
Creating a Privilege Object
Privilege Objects must be created in the same domain as the Association
Object to which it is associated.
1
In the Console Root (MMC) window, right-click a container.
2 Select New - Dell SIP Object to open the New Object window.
3 Type a name for the new object.
4 Select Privilege Object .
5 Click OK .
6 Right-click the privilege object that you created, and select Properties .
7 Click the RCS Privileges tab and select the Remote Console Switch
privileges that you want the user to have.